- Rupture de stock

Vous trouverez ici vos commandes, avoirs, points de fidélité et bien plus encore !
Identifiez-vousVous trouverez ici vos commandes, avoirs, points de fidélité et bien plus encore !
Identifiez-vous
The focus of this video is shortboard shaping although we did make sure to include many of the intermediate topics not covered in the first shaper video. This DVD has a much faster pace than the previous two but no less information.
France / Europe
lundi - vendredi / 9h-12h / 14h-17h
4 fois sans frais
de qualité
Découvrez notre aide en ligne
Table de conversion
Well, here it is. The final entry in the Master Series - the Master Shaper II.
The Master Shaper Series II DVD - (NTSC)
Running Time: Approx 120 Minutes (2 hrs)
Available W/C 13/02/06.
The focus of this video is shortboard shaping although we did make sure to include many of the intermediate topics not covered in the first shaper video. This DVD has a much faster pace than the previous two but no less information. There is a lot of ground covered in this disk so it may take a few viewings to get it all down. In contrast to the original Master Shaper Series, this new addition focuses on the modern shortboard. Also included in this DVD is an in-depth look at wooden boards. Check right for a detailed list of contents.
Here are the main topics covered in the shortboard sequences:
- Tools (with some new additions)
- Very detailed look at the prep sequence
- How to compensate for blank discrepancies
- Plan shape
- Shaping
- Sanding
- Blank detailing
- Finishing work
- Template making
- Rocker templates
- Spin templates
- Pulling templates off existing boards
- Fin placement explained
- A comparison of the different rocker measurement procedures
Here are the main topics covered in the balsa sequences:
- Cleaning up the raw materials (balsa block)
- Determine and draw rocker
- Tool settings and jigs
- Cut rocker
- Cut redwoood stringers
- Glue up blank
- Layout plan shape
- Shape the blank
- Sanding
- Finishing
- Chambering explanation
- Chamber tools and jigs
The focus of this video is shortboard shaping although we did make sure to include many of the intermediate topics not covered in the first shaper video. This DVD has a much faster pace than the previous two but no less information.
A propos
Futures Fins
Enjoy shape and shapers
SHAPERS COMPOSITES CO
Resin Research
check_circle
check_circle