Sealtex HT sealant roll - 15 meters

Sealtex HT sealant roll - 15 meters

General description :
SEALTEX HT is a rubbery sealant compatible with the majority of films and molding tools. It creates a good seal when setting up a vacuum network (vacuum lamination, infusion, bonding of cores, prepreg, molded wood).

Preparation of supports:
All contact surfaces must be clean and dry, free from greasy traces.
On waxed surfaces make sure there are no poorly wiped areas.

Implementation :
Thanks to its packaging in a roll, SEALTEX HT can be used like a classic scotch tape.
When placing it on the support, leave the protective film. This film will be removed as the tarpaulin is laid, this facilitates the operation and keeps the adhesion of SEALTEX HT (surface pollution due to the workshop environment).
SEALTEX HT sealant is suitable for application at temperatures below 150 ° C. For best results, the sealant should cool to room temperature before being removed from the surface of the molding.

Technical characteristics :
Black color
Dry extract: 100%
Processing temperature: + 10 ° C to + 35 ° C.
Maximum temperature of use: 150 ° C

Conditioning :
Width 12mm
Thickness 3 mm
Roll length 15 ml

Storage :
Store in a clean environment with a relative humidity of approximately 30 to 70% and a temperature of 5 ° to 25 ° C.